How to Replace a Kia Sportage Replacement Key
For a variety of Kia models keys, the key has an integrated keyless entry system. This key usually resembles an remote control, and can be replaced with a brand new one from an Kia dealer or a locksmith.
Key fobs might stop working due to various reasons, such as batteries that are dead worn buttons, water damage, signal interference and a malfunctioning receiver module. Here are some suggestions to assist you in getting your Kia sportage replacement key to work again.
How to replace the remote key or smartkey?
If your Kia is equipped with an intelligent key, remote key, push-to-start keys, or a regular non-transponder steel key The battery inside these keys will eventually require replacing. This is especially in the event that your car displays a message indicating that the smart or remote key has low battery power.
It's a simple process. To replace the battery in the keyfob remove your mechanical key from the slit at the back of the fob. Then, pry the cover open. A small screw will be in the key fob to keep the battery in the correct position. Take out the old battery by unscrewing the screw with the help of a small screwdriver. Install the new battery and then close the opening on the key fob.
When the key fob is equipped with a fresh battery and you've tested it, press the lock and unlock buttons. It's good in case the doors lock and unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers become cold or when you need to complete errands in Brandon.
Note: Some key fobs could need to be programmed (transponder chips or smart keys). This requires a programing machine that is available only to the locksmith in the automotive or dealer. Other keys (non-transponder metal keys) do not require programming. If your keys need to be programmed again, you will need to be aware of the key code number stamped on the tag that identifies the key and then record it in a safe location.
How do you replace a dead battery?
If your Kia key fob is not responding to pressing the lock or unlock button on the fob, this is a good indicator that the battery should be replaced. A low battery can also cause other issues, such as the check engine light flashing or the engine not cranking properly. It is quite simple to replace the key fob battery with just a few simple tools.
Make sure to shut off your vehicle and shut all doors prior to starting. Find the small, metal or plastic piece at the bottom of the key fob. Jiggle it until the key pops out. This key can be put into the door's driver handle to unlock your car.
To replace the key fob battery, take off the cover from the back and use a pry bar tool to remove the latch that holds the black negative battery cable. Take the old battery out, and then align the replacement battery to ensure its "+" side is facing you and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place with care to avoid using too much force to avoid bending or damaging the contacts on the metal.
Once the new battery is installed, turn the key fob off and back on in the ignition until the door locks. You can then test your Kia's keys fob once more to ensure it is working correctly.
How do you replace the smart key?
You could have the standard keyfob or Smart Key, based on the model of Kia Sportage. The difference between these is that the smart key has an incredibly small key blade that is hidden inside, while the standard key fob does not. Both key fobs contain batteries that eventually require replacement. Fortunately, it's an easy task that only takes about two minutes.
Make sure to shut off your Kia and be on a flat or well-lit surface prior to when you begin. Keep in mind that there are tiny components inside the fob which could be removed if not careful.
The first step is to find the small release button that is located on the lower backside of your fob. It could be a circular button or a rectangular slot. When you press it mechanical key blade, it will appear and you can then open the key fob.
Once you have the key fob opened, you can simply remove the old battery, and replace it. The new battery is a CR-2032 that can be purchased online or at your local auto parts store. After you've finished you should be able to lock or unlock your vehicle using your key fob, even if the engine isn't running!
How do key fob for kia replace the mechanical key?
The Kia keyfob is an excellent convenience which allows us to lock or unlock our car with just pressing one button. Like all devices it is possible that the Kia key fob can have issues at times. There are ways to fix these issues and ensure that our key fobs are in good working condition over the long haul.
A dead or weak battery is one of the most frequent problems. The battery could cause the device to stop working or work intermittently. If this happens then try replacing the battery with a fresh new one.
If this doesn't solve the issue Try using a standard flathead screwdriver to wedge open the fob's plastic casing. Be careful not to damage any internal components or scratch the plastic. Once the battery is removed and replaced with a brand new battery.
Once the new battery is in, close and then open the doors using the mechanical key (every key fob in the kia has an emergency mechanical key that will fit into the slot). Test the key fob to verify that it's functioning properly. Contact a dealer locksmith to solve the issue in the event that the key fob is not working. Make sure they make you an emergency key that works for all trunk and door cylinders to avoid lockouts again.